Forum: - WDC200EB

Forum: / Archiwum Sprzęt 2007 / WDC200EB - bady?

Autor	Wiadomość
Gibol	Posted: 8 Gru 2007 16:51:59 Przeskanowałem jakimś programem znalazł na 159 sektorach "bad CRC" Czy pomorze low level format? Tutaj jeszcze daje loga ze S.M.A.R.T (przy uruchamianiu kompa Status: BAD) === START OF READ SMART DATA SECTION === SMART Error Log Version: 1 ATA Error Count: 8452 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 8452 occurred at disk power-on lifetime: 24 hours (1 days + 0 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 10 ff 6f 0f f0 Error: UNC at LBA = 0x000f6fff = 1011711 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 10 ff 6f 0f f0 00 05:19:46.100 READ VERIFY SECTOR(S) c8 00 01 00 00 00 f0 00 05:19:46.100 READ DMA 40 00 10 ef 6f 0f f0 00 05:19:42.900 READ VERIFY SECTOR(S) 40 00 10 df 6f 0f f0 00 05:19:39.300 READ VERIFY SECTOR(S) c8 00 01 00 00 00 f0 00 05:19:39.300 READ DMA Error 8451 occurred at disk power-on lifetime: 24 hours (1 days + 0 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 10 ef 6f 0f f0 Error: UNC at LBA = 0x000f6fef = 1011695 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 10 ef 6f 0f f0 00 05:19:42.900 READ VERIFY SECTOR(S) 40 00 10 df 6f 0f f0 00 05:19:39.300 READ VERIFY SECTOR(S) c8 00 01 00 00 00 f0 00 05:19:39.300 READ DMA 40 00 10 cf 6f 0f f0 00 05:19:35.650 READ VERIFY SECTOR(S) c8 00 01 00 00 00 f0 00 05:19:35.650 READ DMA Error 8450 occurred at disk power-on lifetime: 24 hours (1 days + 0 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 10 df 6f 0f f0 Error: AMNF at LBA = 0x000f6fdf = 1011679 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 10 df 6f 0f f0 00 05:19:39.300 READ VERIFY SECTOR(S) c8 00 01 00 00 00 f0 00 05:19:39.300 READ DMA 40 00 10 cf 6f 0f f0 00 05:19:35.650 READ VERIFY SECTOR(S) c8 00 01 00 00 00 f0 00 05:19:35.650 READ DMA 40 00 10 bf 6f 0f f0 00 05:19:31.600 READ VERIFY SECTOR(S) Error 8449 occurred at disk power-on lifetime: 24 hours (1 days + 0 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 10 cf 6f 0f f0 Error: AMNF at LBA = 0x000f6fcf = 1011663 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 10 cf 6f 0f f0 00 05:19:35.650 READ VERIFY SECTOR(S) c8 00 01 00 00 00 f0 00 05:19:35.650 READ DMA 40 00 10 bf 6f 0f f0 00 05:19:31.600 READ VERIFY SECTOR(S) 40 00 10 af 6f 0f f0 00 05:19:28.350 READ VERIFY SECTOR(S) c8 00 01 00 00 00 f0 00 05:19:28.300 READ DMA Error 8448 occurred at disk power-on lifetime: 24 hours (1 days + 0 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 10 bf 6f 0f f0 Error: AMNF at LBA = 0x000f6fbf = 1011647 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 10 bf 6f 0f f0 00 05:19:31.600 READ VERIFY SECTOR(S) 40 00 10 af 6f 0f f0 00 05:19:28.350 READ VERIFY SECTOR(S) c8 00 01 00 00 00 f0 00 05:19:28.300 READ DMA c8 00 01 00 00 00 f0 00 05:19:28.300 READ DMA c8 00 01 00 00 00 f0 00 05:19:28.300 READ DMA
Michał	Posted: 8 Gru 2007 17:06:42 Czy pomorze low level format? Zachodnie raczej nie, ale Mierzeja Wiślana rzeczywiście jest niskiego poziomu.
Nathan	Posted: 8 Gru 2007 17:55:13 Przeskanowałem jakimś programem znalazł na 159 sektorach "bad CRC" Czy pomorze low level format? Pomijając ortografie - Low level format to nie te czasy i nie te dyski. Spróbuj potraktować go HDD regenerator-em


° Forum ° Rejestracja ° Szukaj °